If you have an attic, you may have suffered the consequences of atmospheric conditions on more than one occasion. Rain, snow, hail or wind are factors that can cause serious thermal and humidity problems. Therefore, you should ask yourself the following: what is the best attic insulation installation?
What we are going to address below are the main components with which to protect your home. If you own an attic, on more than one occasion you’ll have problems with leaks and dampness, it is time to take action on the matter and start putting solutions on the table.
As it is impossible to be able to control the external time, what you can do is ensure everything is insured so that the house cannot be damaged. It is essential that the necessary means be used so that the ceiling and walls are in optimal conditions and, in turn, prevent heat from escaping.
When it comes to attic insulation installation, you have to be clear about the steps to follow and try to protect the most sensitive part of the home: the roof. Of course, a good waterproofing outside will be of great help.
The first of all is to get the materials and utensils that will help you to carry out the works. To do this, you will need: a drill, a strong cord, a meter, nails, vapor barrier sheets, metal supports and insulating materials. Think about the materials when you think about the cost of attic insulation.
Place the metal supports on the beams trying to make everything connected symmetrically. Use the string to join the brackets well.
Next, you need to introduce the insulating material between the beams and the metal supports. These will serve to support, in turn, horizontal and long rails from side to side to support another layer of insulation.
Like the roof, the walls of an attic are receptors of all types of weather conditions; but, in turn, they can be the vehicles for heat leakage and pose a problem for the house. Therefore, we must keep in mind the following aspects to work on the walls:
One of the materials that works best is fiberglass. It is a very effective resource. In addition, it fulfills the same function as a vapor barrier. Its placement on the walls would be done in the same way as the procedure we have applied to the ceiling.
Another solution would be loose fill cellulose. It is more resistant than fiberglass and is usually used in places where it is colder.
Both cases are very suitable for attic insulation. What you should keep in mind is that if you put two layers of great thickness, you can get a much more positive result.
Why do we say that the attic is one of the most important parts of the house? Basically, this space closes the house at the top. In fact, it is located in direct contact with the outside by the walls and the ceiling.
It is very important that good quality materials are used. The main purpose is that the roof can be covered to prevent heat leakage and thus avoid any problems related to unnecessary cooling of the home.